CBM Brazed plate heat exchanger
The HEATPAC CBM heater is designed mainly for use in the following applications:
- Preheating of fuel oil prior to centrifugal separation.
- Preheating of lube oil prior to centrifual separation.
The heater uses either thermal oil or hot water as a heating medium.
- Efficient heat transfer
- No replacement parts
- Flanged connections
- Compact design
- Low weight
- Cost effective, low investment
- Optimum use of space
- Easy to install
- Easy to fit into existing systems
- Virtually maintenance-free
Working principle and design
The HEATPAC CBM heater contains a series of corrugated stainless steel plates mounted together to form channels through which the heating medium and the oil flow in opposite directions. Heat is efficiently transferred from the heating medium to the oil through the corrugated surface of the plates.
The media are kept apart in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the heating medium.
- Counterflanges including gaskets and bolts
- Temperature control equipment
- Regulating valve
- Relief valve
Up to 30 m3/h, for preheating.
Actual capacity depends on temperature programme, permitted pressure drop, properties of the heating medium.
The HEATPAC CBM is available in two types: CBM 26 and CBM 76. Each type is available with 20, 40, 60, 80 or 100 plates.
The HEATPAC CBM heater can be installed either vertically or horizontally when thermal oil or hot water are used.
|Working temp.:||max. 225°C|
|Working pressure:||max. 16 bar|
|Material, plates:||stainless steel AISI 316|
|Material, connections:||steel SS 1430|
(CBM 26) or 11/2" (CBM 76)
Complete information and documentation is provided in the Instruction Book accompanying each HEATPAC CBM delivery.